Nilfisk-ALTO 590, 590B Handle, 3. Dip, 4. Strap, FILTERBAG, 1. Zipper, 2. Opening, Lock Position, Storage Position, Note: The 590B Model has a non-foldinghandle

Handle

The handle on the 590 has a storage and an operating position. To change the position of the handle, use the two knobs on the handle. See figure 1

Note: The 590B Model has a non-folding handle.

To put the handle in the storage position, pull out the two knobs. Rotate the knobs ¼ turn. Put the handle forward in the storage position.

To put the handle in the operating position rotate the knobs to the lock position. Put the handle in the operating position.

FILTERBAG

Make sure the filter bag is empty and clean before you install the bag and begin to use the machine. Use the zipper (1) on the bag to remove the contents of the bag. See figure 2.

To install the filter bag, put the opening (2) in the bag around the lip (3) that holds the bag. Tighten the strap

(4) to hold the bag in position. See figure 2

Storage Position Lock Position

Figure 1

	2. Opening
3. Dip		1. Zipper
4. Strap
	Figure 2

Page 8 Clarke® Model 590/590B Operator's Manual