Nilfisk-ALTO C 120.1 Typical fields of application, Task, Accessories ‘Click, Cleaning method

Models: C 120.1

1 18
Download 18 pages 33.94 Kb
Page 9
Image 9
5.2 Typical fields of application

5.2 Typical fields of application

Below you will fi nd a description of a lot of cleaning tasks which can be solved by a pressure washer from Nilfi sk-ALTO in association with accessories and detergents.

Task

Accessories ‘Click

Cleaning method

 

& Clean’

 

Car

Car nozzle,

1. Apply Car Combi Cleaner with the foam sprayer. Always

 

auto brush,

start from the bottom and work upwards. Let Car Combi

 

underchassis

Cleaner act for at least 5 min.

 

nozzle,

2. Wash the car with the car nozzle, which has been optimized for

 

Foam sprayer,

quick and gentle cleaning of enamelled surfaces (the jet is wider

 

Car Combi Cleaner

and not so sharp). Start at the front of the car and work back-

 

 

wards to avoid water from penetrating by the door mouldings.

 

 

3. Use the brush for removal of traffic film which is not removed by the

 

 

nozzle. If the car is very dirty, apply Car Combi Cleaner again.

 

 

4. Attach the undercarriage nozzle and clean undercarriage and

 

 

wheel arches.

 

 

5. Remove water from the surface of the car with the scraper

 

 

on the car brush. Make sure that all grains of sand etc. have

 

 

been removed before using the scraper. Wipe with a wash lea-

 

 

ther where the scraper cannot reach.

 

 

 

Rims, alu-

Rim brush,

Apply Alu Cleaner with an automizer. Let it act for approx.

minium

auto nozzle,

5 min. and wash with the rim brush. For steel rims, use Car Com-

 

atomizer,

bi Cleaner. Use the foam sprayer and wash with rim brush.

 

Alu Cleaner

Be careful! The high pressure jet may damage the tyres.

Flagstones,

Powerspeed®

Wash towards outlets or the like. On surfaces with moss or

concrete

nozzle,

algae you may start by applying Stone & Wood Cleaner with

fl oors and

Stone & Wood

the foam sprayer. Wash before the soap dries. Another

other hard

Cleaner,

more effective and quicker method is to use the Patio

surfaces

Patio Cleaner

Cleaner. Thus you will also avoid splashes.

Garden

Wood Cleaner

Apply Wood Cleaner and wash before the soap dries.

furniture,

Garden brush

NOTE: Use the garden brush to clean off the dirt.

wood

 

 

 

 

 

Brickwork,

Powerspeed®

Same method as for fl agstones, but be careful - bad joints and

Wood work

nozzle,

wood may be damaged by high pressure. You may choose only

 

Stone & Wood

to use the Tornado® nozzle. Adjust the distance (pressure) to

 

Cleaner,

the quality of the joints and the wood. Patio Cleaner can also be

 

Patio Cleaner

used on vertical surfaces.

Gutter

Underchassis spray

Wash the gutter with the nozzle. Always wash towards

 

lance

downpipes. Beware not to spray under the roofi ng.

 

 

 

Cleaning

Tube cleaner

Push the tube cleaner approx. ½ m (to mark) into a tube or drain

of drain

 

and activate the trigger of the spray handle. The nozzle opening

pipes, out-

 

turning backwards will pull the cleaner through the tube. The

lets, down

 

nozzle will break down the „plug“ and fl ush the dirt backwards.

pipes etc.

 

 

 

 

 

Rust, paint

Water/sandblasting

Mount the water/sand blasting equipment and rust and paint

 

equipment

is effi ciently and quickly removed. Beware not to damage the

 

 

surface to be sandblasted.

 

 

 

Green- Tornado® PR nozzle

house brush, Stone & Wood Cleaner

Wash with high pressure and maybe a brush. You may use Stone & Wood Cleaner to remove moss and algae.

Garden

Tornado® PR noz-

Rinse the worst dirt off with the nozzle. Apply Metal Cleaner with

tools, lawn

zle, Powerspeed®

the foam sprayer and let it act for approx. 5 min. Wash with the

mover

nozzle, multiangle

nozzle. You may use the multiangle adaptor for hard to get at

 

adaptor, Metal

areas to avoid splashing.

 

Cleaner

 

 

 

 

 

 

 

9

Page 9
Image 9
Nilfisk-ALTO C 120.1 user manual Typical fields of application, Task, Accessories ‘Click, Cleaning method, Clean’