Nilfisk-ALTO C 120.1 Description, Mains power connection, Safety devices, Thermal sensor

Extension cables should be of a watertight construction and comply with the below-men- tioned requirements for length and cable dimensions.

1.0 mm²	max.	12.5 m
1.5 mm²	max.	20 m
2.5 mm²	max.	30 m

zCable connections should be kept dry and off the ground.

Mains power connection

The following should be ob- served when connecting the high pressure washer to the electric installation:

zOnly connect the machine to an installation with earth con- nection.

zThe electric installation shall be made by a certifi ed elec- trician.

zIt is strongly recommended that the electric supply to this machine should include a re- sidual current device (GFCI).

Water connection Connection to the public mains according to regulations.

IMPORTANT! Only use wa- ter without any impurities. If there is a risk of running sands in the inlet water (i.e. from your own well), an additional fi lter should be mounted.

Repair and maintenance Always remove the electric plug from the socket before car- rying out maintenance work on the machine.

Safety devices

Locking device on spray gun (7a) (see foldout at the end of this manual):

The spray gun features a lock- ing device. When the pawl is activated, the spray gun cannot be operated.

Thermal sensor:

A thermal sensor protects the motor against overloading. The machine will restart after a few minutes when the thermal sen- sor has cooled.

2 Description

2.1	Application	This high-pressure washer has
		been developed for domestic
		use within:
		- Car, Motorbike, boat, cara-
		van, trailer, patio/drive/flags-
		tones, woodwork, brickwork,
		barbecue, garden furniture,
		lawn mower
		Section 5 describes the use of
2.2	Operation elements	See foldout at the end of this
	and model survey	manual.

1 Start/stop switch

2 Water inlet (with fi lter)

3 High pressure connection

4 High pressure hose

5 Electric cable

6 Click & Clean spray lance

7 Spray gun with lock

8 Click & Clean Tornado® PR nozzle

9 Click & Clean Powerspeed® nozzle

10 Click & Clean foam sprayer

the high-pressure washer for vaious cleaning jobs.

Only use the high-pressure washer for purposes described in this manual.

The safety precautions must be observed to prevent damage to the machine, the surface to be cleaned or severe personal injuries.

11Nozzle cleaning tool

12Trolley Handle

13Hose reel (not standard)

14Hose hook

15Model tag

Specifications: See model tag (15) of machine.

Sound pressure level measured in accordance with ISO 3744, EEC Directive 2000/14/EEC: LpA = 71.3 dB(A), LWA = 86 dB(A).

We reserve the right to alter the specifi cations.

4