15
6. TECHNICAL SPECIFICATIONS
SYSTEM SPECIFICATIONS
EXPANDER/GATESECTION
INPUT
Type Activebalanced XLR and 1/4"JACK
Impedance Balanced >50KOhm, Unbalanced>25KOhm
Operating level +4dBu/ 10dBV
Max input level +21dBu balanced and unbalanced
CMRR Typically>55dB at 1KHz
OUTPUT
Type XLRand 1/4" JACK
Impedance Balanced 60 Ohm, Unbalanced 30 Ohm
Max output level >+21dBu
RETURN
Type 1/4"JACK
Impedance >10KOhm
Max input level >+24dBu
SEND
Type 1/4"JACK
Impedance 2KOhm
Max output level
>+21dBu
Bandwidth 20HZ to 20kHz, +0/ 0.5dB
Noise > 90dBu, unweighted, 22Hz to 22kHz
THD <0.01% Typicalat +4dBu, 1kHz, unity gain
<0.04% Typicalat +20dBu, 1kHz, unity gain
IMD <0.01% TypicalSMPTE
Crosstalk < 100dB, 22Hz to 22Khz
Type SmartRatio control Expander
Threshold variable (OFF to +15dB)
Ratio variable (1:1.2 to 1:8)
COMPRESSOR SECTION
Type SmartKnee control Compressor
Threshold variable ( 40dB to +20dB)
Ratio variable (1:1 to :1)
Threshold Characteristic variable (Smart knee control)
ManualAttack Time variable (1ms to 150ms)
Manual Release Time variable from 0.05s to 5s
AutoAttack Time Typical15ms at 10dB, 5ms at 20dB, 3ms at 30dB
Auto Release Time Program dependent, typical 125dB/s
Output level variable ( 20dB to +20dB)
PEAK LIMITER SECTION
Type SmartGain Control Peak Limiter
Threshold variable (0 to OFF (+22dBu))
Ratio :1
Stage 1 Limiter Type Clipper
Attack Time "zero"
Release Time "zero"
Stage 2 Limiter Type Program Limiter
Attack program dependent, typ. <5ms
Release program dependent, typ. 20dB/s