12V0.5A
LAMP
L
TAPEIN
R
TAPEOUT
2-TRACKIN/OUT
- 2-TRACK IN/OUT 43
TAPEIN
Use the Tapeinput if you wish to listen to your Mix from a Taper
Recorder or DAT.You can assign the signal coming from the
TaperRecorder either to a pair of studio monitor using the
Control Room assignment on the front panel or you can also
send the signal directly to the Main Mix.
TAPEOUT
These RCAjacks will route the main mix into a tape recorder.
These sockets will send out the monitor signal to a pair of headphones.
45
- PHONES
- LAMP 44
43 44
B
PHONES
A
Useonlywith a 250V fuse
Useonlywith a 250V fuse
Useonlywith a 250V fuse
PHANTOMPOWER
ON
OFF
ACINPUT
EUROPE
210-240V 50Hz
RATEDPOWERCONSUMPTION: 65W
Fuse:T500mAL
Apparatenskall anslutas
tilljordat uttag nar den
anslutstill ett natverk
4.12 REAR PANELDescription
4546
- POWER ON/OFF switch
This switch is used to turn the Main Power ON and
OFF.
4
- PHANTOM ON/OFF switch
47
-AC inlet with fuse holder
Use it to connect your L-16 to the MainAC with the
suppliedAC cord. Please check the Voltage available
in your Country and how the Voltagefor your L-16
is configured before attempting to connect your L-16
to the MainAC.
4647
4
15
This lovable LAMP is very convenient for your operation, it is located in the top right corner of the front panel,
and provides the 12V socket that can drive any standard TNC-type lamp. Please use the customized gooseneck
lamps, the GL-SQ and GL-RO are both options.
This switch will apply +48 VoltPhantom Power only
to the 10 XLR microphone inputs. Never connect
microphones when the Phantom Power is on already.
UK/ Aust
240V 50Hz
Fuse:T500mAL
USA/ Canada
100-120V 60Hz
Fuse:T800mAL