30
8. TECHNICAL SPECIFICATION

Mono input channels

Stereo input channels

Impedances

Equalization

DSP Section

Microphone input electronically balanced, discrete input configuration
Frequency response 10Hz to 55kHz, + 3dB
Distortion (THD & N) 0.005% at 4dBu, 1kHz+
Gain range 0dB to 60dB (MIC)
SNR (Signal to Noise Ratio) 115dB
Line input electronically balanced
Frequency response 10Hz to 55kHz, 3dB
+
Distortion (THD & N) 0.005% at 4dBu, 1kHz+
Sensitivity range +15dButo 45dBu
Line input Balanced/unbalanced
Frequency response 10Hz to 55kHz, 3dB
+
Distortion (THD & N) 0.005% at +4dBu, 1kHz
Microphone input 1.4kOhm
Channel Insert return 2.5kOhm
All other inputs 10kOhm or greater
Tapeout 1kOhm
All other output 120Ohm
Hi shelving +15dB @12kHz
Mid bell (mono) +15dB @100Hz to 8kHz
Low shelving +15dB @80Hz
Low Cut filter 75Hz,18dB/oct.
Hi Mid (stereo) +15dB @ 3kHz
Mid low (stereo) +15dB @500Hz
A/D and D/Aconverters 24 bit
DSP resolution 24 bit
Typeof effects Hall, Room, Vocal& Plate REVERBS
Mono & Stereo DELAY(max DELAY TIME 650ms)
Chorus, Flanger & Reverb MODULATIONS
REVERB+DELAY,REVERB+CHORUS,
Presets 256
Controls 16-position PRESET Selector
16-position VARIATIONselector
PEAK LED
MUTE SWITCH with LED indicator
REVERB+FLANGER combinations

Main Mix Section

Noise (Bus noise) Fader0 dB, channels muted: 100dBr (ref.:+4dBu)
Fader 0dB, all input channels assignedand set to
UNITY gain: 90dBr (ref.:+4dBu)
Max output +22dBubalanced XLR,
22dBu unbalanced, 1/4" jacks+
AUX Returns gain range - to +15dB
AUX Sends max out +22dBu