4.9 MASTER section
- MAIN MIX LEVEL | 11 |
This Control sets the amount of signal sent either to the Main Out socket or to the Tape Output.
- PHONES/CONTROL ROOM | 12 |
This Control sets the amount of signal sent to the Control Room and headphone.
- LED METER | 13 |
This stereo 6 segments Led Meter will indicate the level of the overall output signal.
- 2 TRACK signal path | 14 |
If you push down the 2TK TO CONTROL ROOM button, the 2 TRACK IN signal will be routed into the Control Room output and the level will be ad- justed by the Control Room knob nearby the Main MIX LEVEL knob.
If you push down the 2TR TO MIX button, the 2 TRACK IN signal will be routed into the MAIN output and will be adjusted by the MAIN MIX LEVEL knob.
- AUX RETURN | 15 |
It will be used to return the signal of an effect processor into the mixer but it can be also used as an additional stereo line input. This signal of the AUX RETURN is always assigned to the MAIN MIX. The Aux Return input will operate in mono if you connect an input only to the left socket.
- PHANTOM PWR | 16 |
This switch will apply +48 Volt Phantom Power only to the 2 XLR microphone inputs. Never con
- PHANTOM 17
This LED indicates when the Phantom Power is switched on.
- PWR 18
This Led indicates when the Power is on in your S-6.
16
15
14
PHANTOM PWR |
|
| |
|
| PHANTOM PWR | |
- 8 | +15 |
|
|
AUX RETURN |
| CLIP | |
|
|
| |
|
|
| 10 |
|
|
| 0 |
| 2TK TO |
| |
CONTROL ROOM |
| ||
|
|
| |
|
|
| |
|
| L | R |
2TK TO MIX | OUTPUT LEVEL | ||
|
| ||
- 8 | MAX | - 8 | +15 |
PHONES / | CONTROL | MAIN MIX | |
ROOM | |||
LEVEL
1211
17
18
13
8
