Watching TV
Turning On/Off the Power
POWER
POWER
(On/Standby)
Press POWER on the TV or on the remote control unit to turn the power on.
•POWER indicator (Green): The TV is on. (After a few seconds, a window appears with sound.)
•The initial setup starts when the TV powers on for the fi rst time. If the TV has been turned on before, the EZ Setup will not be invoked. See page 20 for performing EZ Setup from the Setup menu.
Press POWER on the TV or on the remote control unit again to turn the power off.
•The TV enters standby and the image on the screen disappears.
•The POWER indicator on the TV turns off.
•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
•Weak electric power is still consumed even when the TV is turned off.
Initial Setup
When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit.
1.Insert the batteries into the remote control unit. (See page 8.)
2.Connect the antenna cable to the TV. (See page 8.)
3.Plug in the AC cord to the AC outlet. (See page 7.)
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
1Press a/b to select the desired language listed on the screen, and then press ENTER.
Language
TV Location
Air/Cable | English |
CH Search | Français |
| |
| Español |
TV Location
Select "Home" or "Store" for the location where you plan to install the TV.
2Press c/d to select "Home" or "Store". Press ENTER to enter the setting.
Example
Language
TV Location
Air/Cable
CH Search
HomeStore
•If you select "Home", AV MODE is set to "STANDARD".
•If you select "Store", AV MODE is set to "DYNAMIC (Fixed)". In case no remote control signal is received within 30 minutes, AV MODE will change to "DYNAMIC(Fixed)" automatically.
•For changing the TV Location after the setting, see "EZ Setup" on page 20.
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".
3Press c/d to select "Air" or "Cable". Press ENTER to enter the setting.
Example
Language
TV Location
Air/Cable
CH Search
AirCable
CH Search (Channel search)
Channel auto search makes the TV look for all channels viewable in the set area.
4When "Air" is selected in Antenna setting:
Press c/d to select "Start", and then press ENTER.
Language
TV Location
Air/Cable
CH Search
StartCancel
When "Cable" is selected in Antenna setting:
Press a/b to select "Analog & Digital Search Start" to search both analog and digital broadcasts, or to select “Analog Search Start” to search only analog broadcasts, and then press ENTER.
Language
TV Location
Air/Cable |
| Analog & Digital Search Start |
CH Search |
| Analog Search Start |
|
|
|
|
|
|
|
|
|
|
| Cancel |
|
|
|
•The Channel search will start automatically.
•To exit the Channel search screen, select "Cancel", and then press ENTER.
•If no channel is found, confi rm the type of connection made with your TV and try EZ Setup again.
(See page 20.)
12