I n g N i n t e n d o G a m e C u b e Co n t ro l l e r s

U s i n g N i n t e n d o G a m e C u b e™ Co n t ro l l e r s

Setup of Nintendo GameCube Controllers

Connecting GameCube Controllers

Removing the Controller Socket Cover

NOTE: When using GameCube Controllers with the Wii console, be sure and use the stand plate to help prevent the console from being tipped over by pulling on the controller cable. (See page 11, Vertical Placement.)

Optionally, the console can be placed horizontally. When using GameCube Controllers in the horizontal position, the controller socket cover can be removed to allow the console to lay ﬂat. See page 29 for instructions on removing the cover.

NOTE: GameCube controllers only work when playing GameCube games on the Wii console.

•Plug the controllers into the GameCube Controller sockets on the side of the console.

•Review the instruction booklet for the game you are playing for the number and position of controllers required for that speciﬁc game.

If you are using the Wii console in a horizontal position, you must remove
the controller socket cover when using GameCube Controllers to allow the	Horizontal
console to lay completely ﬂat.	Position
	Position

Press here

Using Nintendo GameCube Controllers

Nintendo GameCube

Controller

Use the Wii stand plate when using GameCube Controllers to prevent the console from tipping over.

1. Stand the Wii console upright as shown and squeeze gently until you feel a	2. Remove the cover by pulling straight up out of the console.
slight click.	3. The cover can be replaced by reinserting the cover straight down into the console

	until it clicks into place.
	NOTE: The GameCube Memory Slot Cover can be removed with the same
	procedure, and should be removed if you are using GameCube Memory
	Cards when the Wii console is placed horizontally.