Nlynx ZWA-G120 user manual Configuring as Wlan Client Adapter, Quick start to configure

Configuring as WLAN Client Adapter

This device can be configured as a wireless Ethernet adapter. In this mode, the device can connect to the other wireless stations (Ad-Hoc network type) or Access Point (Infrastructure network type) and you don’t need to install any driver.

Quick start to configure

Step 1. In “Basic Settings” page, change the Mode to “Client” mode. And key in the SSID of the AP you want to connect then press “Apply Changes” button to apply the change.

Step 2. Check the status of connection in “Status” web page

34