Nokia 2260 manual Manage calls, USE Send OWN Caller ID, Store the Feature Code

2260.ENv1_9355957_.book Page 65 Wednesday, February 26, 2003 11:27 AM

Manage calls

Call waiting works with both local and long distance calls.

•To answer an incoming call, press the Talk key.

•To switch from one call to another, press the Talk key.

•To end both calls, press the End key.

•USE SEND OWN CALLER ID

This feature allows you to block caller ID when you call someone (your number will not be displayed on their caller ID). This feature is only effective when calling a number equipped with caller ID.

Note: This feature is available only when supported by the wireless network and may not function if you are roaming.

Important:This feature works on a call-by-call basis. You must enable this feature each time you want to block the sending of your own number to the recipient’s caller ID.

STORE THE FEATURE CODE

Before you can use the Send own caller ID call feature, you must store the feature codes for activating this feature. Once the code is stored in your phone, it is sent automatically to the network when you select this option from your phone’s menu.

1Press Menu 4-6-5 (Settings > Network services > Network feature setting). The Feature code prompt appears.

2Enter the feature code issued by your service provider and press OK.

3Scroll to Send own caller ID, press Select, then select Yes.

PLACE A CALL WITHOUT SENDING YOUR NUMBER

1Press Menu 4-6-4 (Settings > Network services > Send own caller ID).

2Scroll to No, then press Select.

3Enter the desired phone number, then press OK or press Find to recall a phone number from the contact list.

The phone automatically inserts the feature code into the dialing string and dials the phone number. The phone you are calling will not display your phone number through caller ID.

Nokia 2260 User Guide 65 Copyright © 2003 Nokia