The following is an example of a number you could store in your phone:

This number contains a phone number (18005551212), a wait character, an access number (‘1234’), a wait charac- ter, and a password (‘3434’) - 18005551212w1234w3434.

When you recall this number from memory and press SEND, the phone:

Dials 18005551212 (the stored number), then:

‘Waits’ for you to press SEND again. When you do, the phone sends the numbers 1234.

‘Waits’ for you to press SEND again, then sends the numbers 3434.

The following example shows storing ‘pause’ characters as well as ‘wait’ characters (Note that a ‘wait’ character must still be included, as shown, to separate the phone number from the following digits):

18005551212w1234p3434

When you recall this number from memory and press SEND, the phone:

Dials 18005551212 (the stored number), then

‘Waits’ for you to press SEND again. When you do, the phone sends the numbers 1234. It then:

Pauses for 2.5 seconds, then sends the numbers 3434.

Note: If the keypad tones have been set to Off, the Touch Tones will still be sent, but you will not hear them.

Pressing MENU SEND sends a displayed number as a Touch Tone.

To end the call, press END after the phone sends the Touch Tones and has returned to the normal call mode.

67

Page 74
Image 74
Nokia 252C owner manual