Nokia 252C owner manual If you’ve already entered informa, SEQUENCE. Press OK

2You’ll see CALLING CARD and

the currently selected card. Press OK to change it.

3 Use ! to move the pointer to None, Card A or Card B, then

press OK. When the phone asks for your security code, enter it and press OK.

If you select None, the phone briefly displays NO CARD SELECTED, and no card is selected.

Note: If you’ve already stored card information, and then later select None, the active card is deselected.

However, stored card information is left intact.If you select Card A or Card B, and you’ve never entered

information for the card before, skip to Step 5.

4If you’ve already entered informa-

tion for a Card, you then have the option to Select, Edit, or Erase the card. Use ! to move

the pointer to the option you want, and press OK.

Select chooses this card as the one to use. The phone briefly displays SELECTED.

Edit allows you to change already-entered information, described in Steps 5 and 6 on next page.

Erase erases the stored information. To verify that you want to do this, press OK at the ERASE?

prompt. Press CLR if you don’t want to erase the stored information.

5The phone prompts you to

SELECT DIALING

SEQUENCE. Press OK.

50