Nokia 2720 manual Get started, Insert the SIM card and battery

Models: 2720

1 56
Download 56 pages 61.72 Kb
Page 9
Image 9

G e t s t a r t e d

three times in succession, you are asked for the PUK or PUK2 code. If you do not have them, contact your service provider.

The module PIN is required to access the information in the security module of your SIM card. The signing PIN may be required for the digital signature. The restrictions password is required when using the call restriction service.

To define how your device uses the access codes and security settings, select Menu

>Settings > Security.

Enhancements, batteries, and chargers

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-3U charger.

Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

For availability of approved enhancements, please contact your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

1. Get started

Insert the SIM card and battery

Always switch the device off and disconnect the charger before removing the battery.

This device is intended for use with the BL-4CT battery. Always use original Nokia batteries. See "Nokia battery authentication guidelines” p. 47.

9

Page 9
Image 9
Nokia 2720 manual Get started, Insert the SIM card and battery