G e t t i n g s t a r t e d
■Charging the battery
1.Connect the lead from the charger to the socket on the bottom of your phone.
2.Connect the charger to an AC wall socket.
The text Charging is displayed briefly if the phone is switched on. If the battery is completely empty, it may take a few minutes before the charging indicator appears on the display or any calls can be made.
The charging time depends on the charger and the battery used. For example, charging a
■Switching the phone on and off
Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.
Press and hold the power key .
If the phone asks for a code, key in the code (displayed as
****).
■Normal operating position
Use the phone only in its normal operating position.
Your phone has a
when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.
Not touching the antenna area during a phone call optimises the antenna performance and the talktime of your phone.
■Keypad lock (Keyguard)
You can lock the keypad to prevent the keys being accidentally pressed.
Press(Menu or Unlock) and
then within 1.5 seconds to lock or unlock the keypad.
An incoming call can be handled normally. When you end or reject the call, the keypad will automatically be locked again.
For automatic keypad lock, see Automatic keyguard on page 23.
4 | Copyright © 2004 Nokia. All rights reserved. |