Nokia 5160i manual Choosing a calling card to use

Dialing	Use for cards that	Cards using
sequence	require you to:	this sequence
Access no.	Dial 1-800 access number,	MCI, AT&T True
+ phone no.	then phone number, then	Choice, Sprint
+ card no.	card number (+ PIN if	Canada, Unitel
	required)
Access no.	Dial 1-800 access number,	networkMCI,
+ card no.	then card number (+ PIN	WorldPhone
+ phone no.	if required), then phone	MCI
	number
Prefix	Dial the prefix (any	GTE, PacBell,
+ phone no.	numbers that must precede	AT&T, Stentor
+ card no.	the phone number) and
	phone number you want to
	dial, then card number
	(+ PIN if required)

Note: The order of the following steps may vary, depending on which dialing sequence your card uses.

6Enter access number (usually the 1-800 number listed on the back of the calling card), then press OK.

7Enter your card number and/or PIN, then press OK. Your phone will display Save changes? Press OK.

8Press to reach Card name, then press Select. Enter the card name using your phone’s keypad, then press OK.

Note: This procedure might not work with all calling cards. Please look at the back of your calling card or contact your long distance company for more information.

Choosing a calling card to use

To select a calling card to use, press Menu 4 1 3, scroll to the card you want, then press Options. Select is highlighted; press OK. Enter your security code, then press OK.

19