Nokia 5185i Access no, Choice, Sprint, NetworkMCI, + card no, WorldPhone, Required, then phone

3Scroll to Edit, then press OK.

4Enter your security code (see page 60), then press OK.

5At Dialing sequence, press Select. Press to choose the dialing sequence your card uses, then press Select.

Dialing	Use for cards that	Cards using
sequence	require you to:	this sequence
Access no.	Dial 1-800 access number,	MCI, AT&T True
+ phone no.	then phone number, then	Choice, Sprint
+ card no.	card number (+ PIN if	Canada, Unitel
	required)
Access no.	Dial 1-800 access number,	networkMCI,
+ card no.	then card number (+ PIN if	WorldPhone
+ phone no.	required), then phone	MCI
	number
Prefix	Dial the prefix (any numbers	GTE, PacBell,
+ phone no.	that must precede the	AT&T, Stentor
+ card no.	phone number) and phone
	number you want to dial,
	then card number (+ PIN if
	required)

Note: The order of the following steps may vary, depending on which dialing sequence your card uses.

6Enter the access number (usually the 1-800 number listed on the back of the calling card), then press OK.

7Enter your card number and/or PIN, then press OK. Your phone will display Save changes? Press OK.

8Press to reach Card name, then press Select. Enter the card name using your phone’s keypad, then press OK.

Note: This procedure might not work with all calling cards. Please look at the back of your calling card or contact your long distance company for more information.

32