Store touch tone strings the same way you store phone numbers (see page 50).
You can store a whole digit sequence in your phone book and send it as touch tones for
Sending a touch tone string
Make sure Menu 4 2 3 1 (Settings - Phone settings - Touch tones - Manual touch tones) is not set to Off.
1.During a call, press Options
2.Scroll to Touch tones and press OK
3.Enter touch tone string or recall string from the phone book and press OK
Note: Use caution when sending confidential information over the air when using DTMF tones in analog mode.
Storing touch tone strings with phone numbers
1.Enter the phone number (e.g. your office voice mailbox)
2.Press ∗∗∗ (p) or ∗∗∗∗ (w)
3.Enter the touch tone string (e.g. voice mailbox password)
4.Store the number as you normally would
Note: See “Special Characters (for storing numbers)” on page 38 for details on “” and “w” characters.
When you dial this number, your phone first dials the phone number, then waits (because of the “w” character) for you to press Send. Your phone then sends your password.
If you include a “p” character instead of a “w”, your phone pauses for 2.5 seconds, then automatically sends your password as touch tones.
69
