92Copyright © 2004 Nokia. All rights reserved.
When you have selected GPRS as a data bearer, the phone uses EGPRS instead of
GPRS if this is available in the network. You cannot select between EGPRS and
GPRS, but for some applications you may be able to select either GPRS or GSM
data (CSD, Circuit Switched Data).
GPRS connection
To define the settings for (E)GPRS connections, press Menu, and select Settings,
Connectivity, GPRS and GPRS connection.
• Select Always online to set the phone to automatically register to an (E)GPRS
network when you switch the phone on.
When you start an application using (E)GPRS, the connection between the
phone and network is established. When you exit the application, the (E)GPRS
connection ends, but the phone is still registred to the (E)GPRS network.
If you receive a call or a text message or make a call during an (E)GPRS
connection, the (E)GPRS connection is suspended (on hold).
The indicator for GPRS and (E)GPRS is the same.
• Select When needed to set the phone to register to an (E)GPRS network and
establish an (E)GPRS connection when an application using (E)GPRS requires
it. The (E)GPRS connection will close when you exit the application.
The phone supports three simultaneous (E)GPRS connections. For example, you
can browse XHTML pages, receive multimedia messages, and have an ongoing PC
dial-up connection at the same time.