Tools
106 Copyright © 2005 Nokia. All rights reserved.
If the connection to the manually selected network is lost, the phone will sound an error
tone and ask you to reselect a network. The selected network must have a roaming
agreement with your home network, that is, the operator whose SIM card is in your phone.
Cell info display - Select On to set the phone to indicate when it is used in a cellular
network based on microcellular network (MCN) technology and to activate cell info
reception.

Enhancement settings

Indicators shown in the
standby mode:
- a headset is
connected.
- a loopset is
connected.
- headset
unavailable, connection
to a Bluetooth headset
has been lost.
Select the enhancement: Headset, Loopset, Bluetooth handsfree, or Car kit.
• Select Default profile to set the profile that you want activated each time you connect
a certain enhancement to your phone. See Profiles - setting tones, p. ’12’.
• Select Automatic answer to set the phone to answer an incoming call automatically
after five seconds. If the Ringing type is set to Beep once or Silent, automatic answer
is disabled.
Voice commands
Press and select Tools→ Voice com.. Voice commands allows you to add, delete, and
control voice commands in your phone. Voice commands are recorded the same way as
voice tags. See Adding a voice tag to a phone number, p. ’30’.

Adding a voice command to an application

You can have only one voice command per application.
1Select the application to which you want to add a voice command.
To add a new application to the list, select Options→ New application.
2Select Options → Add voice command. See Adding a voice tag to a phone number, p.
’30’.
R0915_en.book Page 106 Tuesday, February 8, 2005 11:46 AM