Nokia 9300i - page 31

You need to define settings only for e-mail accounts.

Define the following on the General page:

•E-mail account name — Enter a descriptive name for the connection. Note that the maximum length of the name is 25

characters.

•My name — Enter your name.

•Username — Enter your user name, given to you by your service provider.

•Password — Enter your password. If you leave this field blank, you will be prompted for a password when you try to connect

to your mailbox.

•My e-mail address — Enter the e-mail address given to you by your service provider. The address must contain the @ character.

Replies to your messages are sent to this address.

•Internet access — Select the Internet access point that you want to use.

•Default account — If you have created several e-mail accounts, select the e-mail account you want to use as the default

account.

Tip: When you write the e-mail, the account that is used to send the e-mail is shown under the e-mail icon next to the

recipient and subject information.

Define the following on the Servers page:

•E-mail account type — Select the e-mail protocol your remote mailbox service provider recommends. Note that this setting

can be selected only once and cannot be changed if you have saved or exited from the mailbox settings.

Tip: POP3 is a version of Post Office Protocol, a standard protocol for receiving e-mail from your remote server. With

POP3, you can check your remote mailbox and download your e-mail. IMAP4 is a version of Internet Message Access

Protocol, a standard protocol for accessing e-mail on your remote server. With IMAP4, you can conduct searches,

create, delete and manage messages and folders on the server.

•Outgoing e-mail server — Enter the IP address or host name of the computer that sends your e-mail.

•Incoming e-mail server — Enter the IP address or host name of the computer that receives your e-mail.

•Use SMTP authentication — Select whether the SMTP (Simple Mail Transfer Protocol) server requires authentication, and enter

the SMTP user name and password.

Define the following on the Roaming page:

•Change connection automatically — Select whether you want the device to switch between connections automatically if

connection to the primary Internet access point is lost.

•Second access, Third access, and Fourth access — Define the other possible Internet access options.

Define the following on the Retrieve page:

•Retrieve — Select whether you want to retrieve only the e-mail header information such as sender, subject and date, e-mails,

or e-mails with their attachments.

•Max. size of e-mail — Define how large e-mails are retrieved to your device.

•Sync. e-mails in Inbox — Select the number of e-mails you want to download from the remote server to your Inbox.

•Sync. e-mails in folders — Select the number of e-mails you want to download from the remote server to your folders.

Define the following on the Advanced page:

•Default e-mail type — Select whether to sent e-mail as Plain text, Plain text (no MIME) if the receiving e-mail system cannot

display e-mail sent in the regular Internet format, or Formatted text (HTML) to be able to use enhanced text formatting options.

•Send e-mail — Select Immediately to send the e-mail as soon as possible, During next connection to send it the next time

you retrieve e-mail, or Upon request to store the e-mail in the Outbox, from where you can send it later.

•Include signature — Select whether you want to use a signature. Select Use my contact card to use the contact card in the

device, or Custom to use a signature file that you can create for the e-mail account.

•Request read report — Select whether you want to receive a note when the recipient has opened your e-mail.

•Allow report requests — Select whether you want the sender of the e-mail to receive a note that you have read the e-mail.

•Copy to my e-mail address — Select whether you want to receive a copy of every e-mail you send.

•Secure login (APOP) — Select whether you want to use a POP3 secure login system, if the POP3 server you use supports this

system.

•Incoming secure connection — Select whether you want to use encryption to make the incoming connection secure. Secure

connection is used with POP3 and IMAP4 protocols to secure the connection to a remote mailbox. Note that the remote server

must support secure connections for this function to work.

•Outgoing secure connection — Select whether you want to use encryption to make the outgoing connection secure. Secure

connection is used with the SMTP protocol to secure the connection to a remote mailbox. Note that the remote server must

support secure connections for this function to work.

Messaging