Nokia 9300i 10. Presentations

10. Presentations

In Presentations, you can open, view, edit, and save presentations created with Microsoft PowerPoint 97 or later. You can also

create new presentations. Note that not all features and formatting of the original files are supported.

Go to Desk > Office > Presentations.

To open an existing presentation, press Menu, and select File > Open..., or press Ctrl+O. Browse for the folder where the file is

saved. You can scroll the slide up and down, left and right with the joystick.

Tip: To open a recently viewed presentation, press Menu, and select File > Recent presentations.

To move between slides, press Next and Previous. To move directly to a specific slide, press Menu, and select Tools > Go to

slide.... Select the slide from the list, and press Go.

To zoom the view, press Menu, and select View > Zoom.

Tip: You can also zoom in and out by pressing Chr and the magnifying glass keys.

To view slides in full screen mode, press Menu, and select View > Full screen mode. In full screen mode, press any of the command

buttons to display the commands. You can also use Ctrl+T to switch between the full screen and normal screen modes.

Special effects or animation in a presentation are shown in a slide show. Note that not all special effects or animations are

supported.

To start a slide show, press Menu, and select View > Slide show > View show.

To set slide show options, press Menu, and select View > Slide show > Show unsupported objects or Show animations.

To move between slides in a slide show, press Menu, and select Show > Next and Previous. To select the first or last slide, press

Menu, and select Show > First slide or Last slide. To move to a specific slide, press Menu, and select Tools > Go to slide.... Select

the slide from the list, and press Go.

To end the slide show, press Menu, and select Show > End show.

You can show slide shows with a compatible data projector, or other compatible projection system. The slide show is transferred

to the data projector using a Bluetooth connection.

To be able to show slide shows with a compatible data projector, you need to install the drivers of the data projector. If the

drivers are not installed, the menu options are not visible. For more information, check with the data projector manufacturer

or its representative.

To show slide shows with a data projector, select the presentation, press Menu, and select View > Slide show > Show on

external display. To start the slide show, press Menu, and select View > Slide show > View show. Note that no special effects

or animations are supported. If the presentation contains notes, they are only visible on the communicator display.

Tip: If you have not selected a data projector earlier, the External display dialog opens. Select a data projector, press

Connect, then Done.

Tip: If you switch from the slide show view to another view during the show, for example, to outline view, the

presentation is no longer displayed on the external view. To continue showing the slide show with a data projector,

switch back to the slide show view.

To change the data projector, press Menu, and select View > Slide show > External display settings.... In the External display

dialog, select a device from the list, and press Connect, then Done.

To stop showing a slide show with a data projector, press Menu, select View > Slide show, and deselect Show on external display.

To create a new presentation, press Menu, and select File > New presentation. Activate a text field by pressing the tab key, and

start writing. When you are ready, press OK, and move to the next text field. If you want to use a template, press Menu, and

select File > New presentation > Use template.... Browse for the folder where the template is saved.