Nokia 9860 S owner manual Technical Specifications, LNB / Tuner input

TECHNICAL SPECIFICATIONS

Transmission Standards

	DVB, MPEG 2
LNB / Tuner input
Connector	1x F-type (LNB)
RF input frequency	920-2150 MHz
RF input power level	-20 to -70 dBm
Supply voltage	13,5 /18,5 V ± 5%
Max. current	500 mA, overload protected
Control voltage	22 kHz, 0,65 Vpp
DiSEqC	Tone burst A/B or
	Level 1.2
RF impedance	75 Ω

RF modulator

Input/output connector IEC female / IEC male

Modulator frequency	470 to 862 MHz
Output level	70 ± 5dBV
Output channel	21-69
Preset channel	43
Output signal	PAL B/G orPAL I
TV SCART	1 Vpp (± 1 dB) / 75 Ω
Video output
Audio output	0,5 Vrms / RL >10 kΩ
RGB output	Internal RGB or from
	AUX SCART
RGB bandwidth	5,8 MHz ± 3 dB
Fast blanking output	Internal or from
	AUX SCART
Status output	0/6/12 V / RL 10 kΩ

Conditional access system:

Embedded Viaccess and one PCMCIA interface for a Common Interface CA module

(DVB Standard)

Smartcard Interface:

Interface for one card according to ISO 7816

Supports embedded descrambler Viaccess

Front panel	4x7 segment numeric LED display,
	Buttons: ,	(standby, progr. number
	up and down)
General data
Article code	The model code, variant and serial number,
	are located on a label on the underside of
	the housing.
Supply voltage		95-250 V AC, 50-60 Hz
Power consumption max		27 W at 500 mA LNB load
Power consumption in
standby		5 W
Operating temperature		+5° C to +45° C
Storage temperature		- 40° C to +65° C
Humidity		25 to 90 % rel humidity
Operating distance for
remote control		max 10 meters
Dimensions (w x d x h)		380 x 240 x 65 mm
Weight		1,8 kg approx

AUX SCART		1 Vpp (± 1 dB) / 75 Ω	SCART-sockets
Video output
				TV		AUX
Video input		1 V pp / 75 Ω	1	Audio out right ch.		Audio out right ch.
Audio output		0,5 Vrms / RL >10 kΩ	2	-		Audio in right ch.
Audio input		0,5 Vrms / RL >10 kΩ	3	Audio out left ch.		Audio out left ch.
Status input		0/6/12 V / RL >10 kΩ	4	Audio ground		Audio ground
Fast blanking input 0/2 V for RGB, bypass to			5	RGB blue ground		RGB blue ground
		TV SCART
			6	-		Audio in left ch.
RGB input		Yes
			7	RGB blue signal out		RGB blue signal in
DIGITAL AUDIO (S/PDIF)			8	Switch voltage out		Switch voltage in
Connector		1 x RCA	9	RGB green ground		RGB green ground
AUDIO R L			10	Connect to pin 10 in AUX scart
			11	RGB green signal out RGB green signal in
Connector		2 x RCA (R+L)
			12	-	-
Output		0,5 Vrms ± 0,5 dB/ RL 10 kΩ
			13	RGB red ground		RGB red ground
SERIAL (RS 232) Serial data			14	Fast blank. ground		Fast blank. ground
			15	RGB red signal out		RGB red signal in
Connector		9-pin D-sub male
			16	Fast blanking out		Fast blanking in
Signals		RS232, max. 115,2 kbit/s
			17	Video out ground		Video out ground
Pin 1	DCD	(Data carrier detect) not connected
2	RXD	(Receive data)	18	-		Video in ground
			19	Video out		Video out
3	TXD	(Transmit data)
			20	-		Video in
4	DTR	(Data terminal ready) Set to high
			21	Ground (casing)		Ground (casing)
5	GND	(Signal ground)
6	DSR	(Data set ready) not connected
7	RTS	(Ready to send)		20			2
8	CTS	(Clear to send)
9	RI	(Ring indicator) not connected		21				1

GB 40