Nokia DIGITAL MULTIMEDIA TERMINAL Base Frequency, Code Rate, Symbol Rate, Modulation Channel

Base Frequency

Base frequency is an ASTRO transmission parameter. This setting should normally be set to 10.982 GHz unless otherwise advised by ASTRO.

Code Rate

Code rate is an ASTRO transmission parameter. This setting should normally be set to 7/8 unless otherwise advised by ASTRO.

Symbol Rate

Symbol rate is an ASTRO transmission parameter. This setting should normally be set to 30.0 Mbauds unless otherwise advised by ASTRO.

Modulation Channel

Modulation channel is the RF output channel of your DMT. You can select your DMTÕs RF output channel in the UHF band ranging from channel 21 to

69.Note that if you decide to change this setting, your television will need to be re-tuned in order to receive the ASTRO RF signal on the newly selected UHF channel. If you are experiencing interference from other local TV transmission while using the UHF antenna input on your TV to revive ASTRO, you may need to experiment with this setting.

Note : If you are using an A/V connection into the Audio and Video inputs of your TV or Home Theater system then this RF frequency setting has no effect.

21