Nokia DIGITAL MULTIMEDIA TERMINAL owner manual Basic Operations, Changing Channels

CHAPTER 1 : Basic Operations

When you switch ON the mains AC power switch on the wall socket, your DMT will be put into Stand-By mode. In Stand-By mode, you will notice that the front panel display will show the current time. While in Stand-By mode, you will need to switch ON the DMT in order to view ASTRO programmes. To switch ON your DMT perform any one of the following:

¥Press the Stand-By Button on either the DMT front panel or remote control.

¥Press any of the Numeric Keypad Buttons ( 0 É 9 ) on your remote control.

¥Press either the P+ or P- button on your remote control.

CHAPTER 2 : Changing Channels

There are 3 basic ways to surf through the list of available channels broadcast by ASTRO. In all cases, a channel banner will appear on the top of your TV screen displaying basic information related to the channel selected. ASTRO channels can be selected using the following meth- ods:

Using the Numeric Keypad (0É9)

Your DMT remote control contains a set of numerical buttons labeled from 0 to 9 . If you know the ASTRO channel which you want to watch, simply key in the channel number on the numeric keypad by pressing the numeric keys in quick succession.

Using the Programme Buttons P+ or P-

Pressing P+ or P- selects the next higher or lower channel number to the one currently selected.

Stand-By

Mode

ON

Mode

Channel	Current
Number	Programme
Short Channel	Elapsed
Name	Time

Start Time Stop Time

4