Camera
23
To send an image to the other party during an active
call, select Options> Send to caller.
To edit the picture, select Options> Edit. See ‘Edit
images’, p.26.
To print the picture, select Options> Print. See ‘Image
print’, p.41.
Take pictures in a sequence
Advanced sequence is available only in the main camera.
To set the camera to take several pictures in a sequence,
select Options> Advanced sequence, and set the
shooting frequency. The number of pictures is restricted by
the available memory.
To take the pictures, press the capture key.
After you take the pictures, they are shown in a grid on the
display. To view a picture, press to open it.
You can also use the sequence mode with the self-timer.
To return to the sequence mode viewfinder, press the
capture key.
You in the picture—self-timer
Self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
select Options> Self timer > 2 seconds, 10 seconds, or
20 seconds. To activate the self-timer, select Activate.
The self-timer indicator ( ) blinks and the device beeps
when the timer is running. The camera takes the picture
after the selected delay elapses.
You can also use the self-timer in the sequence mode.
Tip! Select Options> Self timer > 2 seconds to keep
your hand steady when taking a picture.
The flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover
the flash while taking a picture.
The camera has an LED flash for low light conditions. The
following flash modes are available: Automatic (),
Red eye redu. (), On (), and Off ().
To use the flash, select Options> Image setup > Flash >
On.
If the flash is set to Off or Automatic during bright
conditions, the flash still emits a low light when an image
is captured. This indicates to the subject of the picture
that the picture is taken. There is no flash effect on the
resultant picture.