Make calls
69
edit the text before sending it. To set up this option and
write a standard text message, see ‘Call settings’, p.103.
Answer or reject a video callWhen a video call arrives, is displayed.
Tip! You can assign a ringing tone for video calls.
Press and select Profiles.
Press to answer the video call. Allow video image to
be sent to caller? appears on the display. To start sending
live video image, select Yes.
If you do not activate the video call, video sending is not
activated, and you only hear the voice of the caller. A grey
screen is shown in place of the video image. To replace the
grey screen with a still image captured by the camera in
your device, see ‘Call settings’, Image in video call, p. 103.
To end the video call, press .
Call waiting (network service)You can answer a call while you have another call in
progress if you have activated Call waiting in Tools>
Settings> Call > Call waiting.
Tip! To change the device tones for different
environments and events, for example, when you want
your device to be silent, see ‘Profiles—set tones’, p.99.
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select Options>
Transfer. To end the active call, press or close the
sliding keypad; the first call is still active. To end both
calls, select Options> End all calls.
Options during a voice callMany of the options that you can use during a voice call
are network services. Select Options during a call for some
of the following options: Mute or Unmute, Answer,
Reject, Swap, Hold or Unhold, Activate handset,
Activate loudsp., or Activate handsfree (if a compatible
headset with Bluetooth connectivity is attached), End
active call or End all calls, New call, Conference,
Transfer, and Open active standby. Select from the
following:
Replace—to end an active call and replace it by answering
the waiting call.
Send MMS (in UM TS ne two rks onl y)— to s end an im age or
a video in a multimedia message to the other participant
of the call. You can edit the message and change the
recipient before sending. Press to send the file to a
compatible device (network service).