4.In the Pair with device dialog, use the generated passcode or replace it with a passcode of your own. Define whether the paired device should be trusted (your phone can connect to the Nokia N800 without notification) or not after it is paired, select or unselect Set as trusted device. Tap OK, and enter the same passcode on your compatible phone.
5.After successful pairing, the mobile operator setup wizard is presented. Use it for saving your internet connection settings. If you have already saved the settings or plan
to save them later from the Control panel, tap Cancel. You can access the wizard afterwards by tapping 
and selecting Tools > Control panel. In the control panel, select
Control panel > Tools > Mobile operator setup wizard....
6.Tap Finish to save the settings.
Tip: Set your Nokia N800 as a trusted device from the Bluetooth connectivity menu of your phone. This way you allow your Nokia N800 to access your phone, and you do not have to confirm the connection every time you activate it. For more information, refer to the user guide of your phone.
If you change the Bluetooth connectivity name of your phone, it is not updated to your Nokia N800 automatically. To update the name, pair the Nokia N800 with your phone again.
Manually create connection
To define mobile phone connections manually, tap 
and select Tools > Control panel > Connectivity > Connections > New. The welcome page of the internet setup wizard is displayed. Tap Next to proceed to the Connection setup: Name and type dialog.
1.In the Connection setup: Name andtype dialog, define the following settings:
Connection
Connection
2.You must select the network manually if you have not paired a compatible mobile phone with your device. Select the type of cellular network over which the internet connection takes place: GSM/UMTS or CDMA.
© 2006 Nokia. All rightsreserved.
Internet connections
23
