8. Hold the Left Rear Upper Body Cover (26) and | 8 |
|
|
|
the Left Front Upper Body Cover (27) around |
|
|
| |
|
|
| 29 | |
the left Upper Body Leg (24). Attach the Upper |
|
|
| |
116 |
|
|
| |
Body Covers with five M4 x 16mm Screws (116). |
|
|
| |
|
|
|
| |
Attach the Right Rear Upper Body Cover (28) |
|
|
| 28 |
|
|
|
| |
and the Right Front Upper Body Cover (29) | 27 |
|
| |
in the same way. |
|
|
|
|
|
|
| 24 | 26 |
|
|
|
| |
|
|
|
| 116 |
9. Apply a small amount of grease to the axle on | 9 |
|
|
|
the Left Link Arm (30), to the axle on the Left | 24 |
|
| |
|
|
| ||
Pedal Arm (32), and to a Wave Washer (100). |
|
|
| |
|
|
| 31 | |
|
|
|
| |
Slide the Wave Washer (100) onto the axle on |
|
|
|
|
the Left Pedal Arm (32). Next, slide a Link Arm | Grease | 74 |
|
|
Spacer (74) onto the axle on the Left Link |
|
|
|
|
Arm (30). |
|
|
|
|
Then, insert the axle on the Left Link Arm (30) |
|
|
|
|
into the left Upper Body Leg (24) while sliding |
|
| 100 |
|
the Left Link Arm onto the axle on the Left Pedal |
|
|
| |
| 30 |
|
| |
Arm (32). |
|
| 32 | |
|
|
|
| |
Repeat this step with the Right Link Arm (31). |
|
| Grease | |
|
|
|
| |
10. Attach the Left Link Arm (30) to the Left Pedal | 10 |
|
|
|
Arm (32) with an M8 x 15mm Button Screw | 24 |
|
| |
|
|
| ||
(106), an M8.5 x 16mm x 1.5mm Washer (103), |
|
|
| 31 |
and an Axle Cover (66). |
|
|
| |
|
|
| 106 | |
|
|
|
| |
Attach the Left Link Arm (30) to the left Upper | 66 | 74 | 103 | |
66 |
| |||
Body Leg (24) with an M8 x 25mm Button | 103 |
|
| |
Screw (110), two M8.5 x 16mm x 1.5mm |
|
|
| |
110 |
|
|
| |
Washers (103), two Axle Covers (66), a Link |
|
|
| |
|
|
|
| |
Arm Spacer (74), and an M8 x 15mm Button |
|
|
|
|
Screw (106) as shown. |
|
| 30 |
|
|
|
|
| |
Attach the Right Link Arm (31) in the same |
|
| 106 |
|
way. |
|
| 66 | |
|
| 103 | ||
|
|
|
| 32 |
| 9 |
|
|
|
