NordicTrack a2550 pro warranty Problem Solution, Turn if the walking belt has shifted to

PROBLEM:

SOLUTION:

PROBLEM:

SOLUTION:

The walking belt is off-center or slips when walked on
a. If the walking belt is off-center, first remove the
key and UNPLUG THE POWER CORD. If the	a
walking belt has shifted to the left, use the hex
key to turn the left idler roller bolt clockwise 1/2 of
a turn; if the walking belt has shifted to the
right, turn the left idler roller bolt counterclockwise
1/2 of a turn. Be careful not to overtighten the
walking belt. Then, plug in the power cord, insert
the key, and run the treadmill for a few minutes.
Repeat until the walking belt is centered.
b. If the walking belt slips when walked on, first re-
move the key and UNPLUG THE POWER CORD.	b
Using the hex key, turn both idler roller bolts clock-
wise, 1/4 of a turn. When the walking belt is cor-
rectly tightened, you should be able to lift each
edge of the walking belt 2 to 3 in. (5 to 7 cm) off
the walking platform. Be careful to keep the walk-
ing belt centered. Then, plug in the power cord, in-
sert the key, and carefully walk on the treadmill for
a few minutes. Repeat until the walking belt is
properly tightened.
The console display has lines running through it

a. If lines appear in the console display, see THE INFORMATION MODE on page 20 and adjust the contrast level of the display.

24