MAINTENANCE AND TROUBLESHOOTING
Inspect and properly tighten all parts of the elliptical exerciser regularly. Replace any worn parts immedi- ately.
For smooth |
| |
operation of the |
| |
elliptical exer- | Ramp | |
ciser, inspect | ||
| ||
and clean the |
| |
ramp regularly |
| |
using a soft | Wheel | |
cloth and mild | ||
| ||
detergent. |
| |
Other parts of |
| |
the elliptical |
| |
exerciser can |
| |
also be cleaned |
| |
in this way. |
|
Keep liquids off the console. Never use abrasives or solvents.
PULSE SENSOR TROUBLESHOOTING
If the handgrip pulse sensor does not function proper- ly, see step 5 on page 12.
HOW TO CALIBRATE THE INCLINE SYSTEM
If the elliptical exerciser’s ramp does not function prop- erly, press one of the 1 Step Ramp buttons; while the ramp is moving, unplug the power cord. When the power cord is plugged back in, the elliptical exercis- er’s incline system will automatically calibrate itself. During the calibration process, three dashes (– –
HOW TO MOVE THE ELLIPTICAL EXERCISER
Stand in front of the elliptical exerciser, hold the han- dlebars firmly, and place one foot against the ramp in the location shown below. Pull the handlebars until the elliptical exerciser can be moved on the front wheels, and carefully move the elliptical exerciser to the desired location. Then, place one foot against the ramp and lower the elliptical exerciser. Due to the size and weight of the elliptical exerciser, use extreme caution while moving and lowering it.
Handlebars |
Place your |
foot here |
Wheel |
HOW TO LEVEL THE ELLIPTICAL EXERCISER
If the elliptical exerciser rocks during use, turn one or both of the leveling feet under the rear stabilizer until the rocking motion is elimi- nated.
Leveling |
Foot |
21
