Sirius Satellite Radio SR4000 Troubleshooting, Fault, Probable Cause, Remedy, Specifications

Troubleshooting

	FAULT	PROBABLE CAUSE	REMEDY
Orbiter does not turn on		Blown Fuse, power cable not properly	Check fuse, check power cable
		connected
	“ANTENNA NOT	Satellite antenna not connected	Check satellite connection to receiver
	DETECTED”
		Antenna or cable is faulty	Contact system installer or vendor
	message
		FM modulator frequency contains static	Switch to another FM frequency
	Audio static or loss of
	clarity	Vehicle antenna not connected to radio	Check vehicle antenna cable
	No signal on receiver	Check for obstacles over or around	Change location to eliminate nearby
	display	antenna	obstacles (bridge, etc.)
	No Sound	1. Audio Cables not connected	1. Check cables at Receiver and radio
		2. Incorrect FM modulator frequency	2. Select another FM modulator
			frequency.
26
			Orbiter SR4000 User Guide

Specifications

Audio Output	2.2V (Peak-to-Peak)
Total Harmonic Distortion (THD)	<0.3%
Signal-to-noise (S/N)	Greater than 75dB
Fuse Requirement	3A Slow Blow
Power Supply	10-16V, Negative Ground, DC
Receiver Dimensions	138mm(W) x 92mm(H) x 48mm(D)
.......................................................................................................................	(5-3/8” W x 3-5/8” H x 1-7/8” D)
Receiver Weight	311g (11oz.)
Remote Control Dimensions	49mm(W) x 164mm(H) x 30mm(D)
..........................................................................................................................	(1-7/8”W x 6-3/8”H x 1-1/8”D)
Remote Control Battery Requirements	2 x “AAA”

	Note: Features and Specifications subject to change without notice.
		27
Orbiter SR4000 User Guide