Setting Channel Presets
You can store up to 30 of your favorite channels as presets, for quick access. Presets are stored in 3 banks, A, B & C, each containing 10 channel presets.
1.Press the BAND button to activate the preset bank you want. The selected bank is shown in the lower right corner of the Default screen.
2.Select the channel you want to preset (see Basic Operation and Changing Channels on page 9).
3.Hold the numbered preset button you want to store the channel in for at least 2 seconds.
•The selected preset number will flash and then remain lit on the display to show that it has been memorized.
•If the preset button already has a channel stored in it, it will be replaced with the new channel.
Recalling Channel Presets
The 10 presets in the active bank (A, B or C) can be selected by pressing the “0” – “9” buttons.
1.Press the BAND button to activate the preset bank you want. The selected bank is shown in the lower right corner of the Default screen.
2.Press the desired preset button “0” – “9” to recall the preset. The channel will change and the display will revert to the Default screen for the new channel.
Searching for a Channel Preset (P.TUNE Mode)
It is possible to quickly search through all of your presets using the Rotary Knob.
1.Press and hold the BAND button to enter the Preset Tune Mode (P.TUNE).
2.The bottom right portion of the display will change to highlight the current preset (bottom right).
3.Turn the Rotary Knob in either direction to move up or down through your presets. The new channel will start to play as soon as you stop turning the Rotary Knob.
• Only stored presets will be displayed, regardless of what bank they are stored in.
•Presets will be grouped and displayed by preset bank and number (ex.
Default Display | P.TUNE Display |
Preset Tune List Mode
The P.TUNE Mode can also be viewed as a list showing Channel Name, Artist Name, or Song Title just like in the Channel List Mode:
1.Press and hold the BAND button to enter the Preset Tune Mode (P.TUNE) (bottom).
2.Press the DISP button for
•Pressing the DISP button while in this mode will change between Channel Name (right top), Artist Name (right middle), and Song Title list modes (right bottom)
•The name field will scroll only if the length of the artist or song title cannot be viewed in its entirety.
3.Use the Rotary Knob to select the desired preset.
4.Push and release the Rotary Knob to select the preset. The channel will change and the display will revert to the P.TUNE Display.
P.TUNE Channel
Name List
Display
P.TUNE Artist
Name List
Display
P.TUNE Song
Title List
Display
12 |
|
Orbiter SR4000 User Guide |
| 13 |
Orbiter SR4000 User Guide |
