Sirius Satellite Radio SR4000 manual Memory Options, Time-BasedFeatures

Memory Options

In this mode, the user can turn the Memory Search Function (S-Seek) ON or OFF. In addition, all 30 Preset Memory Locations can be cleared. To change the Memory Options, use the following procedure while in the “Menu Options” List mode:

1.Use the Rotary Knob to highlight the “Memory Options”. Press the Rotary Knob to select.

2.Select one of the following Memory Options:

a.Automatic Memory Search function - On or Off: Use the Rotary Knob to select between the 2 options by highlighting the desired selection. Then press the Rotary Knob to enter the option.

b.Clear All Memory Locations: Press and release the Rotary Knob; a prompt display screen appears

confirming - Clear All Memory Select “Yes” or “No” and press the Rotary Knob.

To exit this function, press the Rotary Knob or MENU button. No button activity for 10 seconds will also exit this function.

22

Time-Based Features

This Menu Option allows for adjustments of the following items:

Clock	Auto Shutdown
Alarm Clock	Sleep Mode
Program Alert

To change the Time-Based Features, use the following procedure while in the “Menu Options” List mode:

1.Use the Rotary Knob to highlight the “Time-Based Features”. Press the Rotary Knob to select.

2.Use the Rotary Knob to select one of the following Time-Based Features to adjust:

a.Clock: When entering this menu option, you can setup the clock shown on the default display, based on the format desired, and the time zone in which you reside. The clock data is provided via the Sirius Satellite data stream, and will update based on the received signal.

•Format: The Clock Format option allows for either 12 Hour (Default), or 24 Hour display options. Use the Rotary Knob to select the desired format.

Orbiter SR4000 User Guide

•Time Zone: Since the Clock adjusts the time automatically, it is important to specify your proper time zone. Use the Rotary Knob to select the proper time zone. The following is a list of time zones included:

(GMT-9:00)Alaska (GMT-8:00) Pacific (GMT-7:00) Mountain (GMT-6:00) Central (GMT-5:00) Eastern (GMT-4:00)Atlantic (GMT-3:30) Newfoundland (Abbreviated as Newfndlnd)

•Daylight Savings Time (DST) Observance:

Activate this function if your area is subject to DST; turn the Rotary Encoder to toggle between DST Observed (default) or DST Not Observed.

b.Alarm Clock: When this menu option is highlighted and selected, you will be able to set the unit to turn on at a specific time. The last selected channel prior to shutdown will be present when the Alarm feature is activated. Alarm appears on the first line of the display followed by the alarm options:

Orbiter SR4000 User Guide

•Set Alarm: Use the Rotary Knob to select “Set Alarm” From the Alarm Clock Menu. Select either “Alarm Off” (Default) or “Alarm On” from the Menu and press the Rotary Knob to set alarm status.

•Alarm Time: Use the Rotary Knob to select “Alarm Time” from the Alarm Clock Menu. Rotate the Rotary Knob to set the time you want the SR4000 Receiver to activate (Default is 12:00pm). Press the

Rotary knob to store the Alarm Time.

c.Program Alert: When this menu option is highlighted and selected, you will be able to program the unit to switch to a selected channel at a specific time. Press the Rotary Knob to enter the Program

Alert Menu, The following adjustment options are available:

•Program Time/Day: Turning the Rotary Knob toggles between Time and Day. If Time is selected, use the Navigation Wheel increase (CW) or decrease (CCW) the set time in a circular motion on one line in the middle of the display from the default value (12:00pm). AM or PM will switch automatically when theAM or PM threshold has

Continued on Next Page

23