5.Have another person hold the Console (4) near the Upright (2).
Connect the Upper Wire Harness (97) to the wire har- ness on the Console (4). Connect the Pulse Wire (3) to the pulse wire on the Console. Next, locate the two ground wires that are connected with a screw to the Upright (2), and connect the ground wires to the two smallest wires on the Console.
Carefully insert all excess wiring down into the Upright
(2). Attach the Console (4) to the Upright with four M4
x16mm Screws (57). Be careful to avoid pinching the wires. Next, press the bookrack onto the Console in the indicated location.
6.Attach the Seat (9) to the Seat Frame (7) with four M6
x20mm Button Screws (20) and four M6 Washers (60).
7.Attach the Seat Frame (7) to the Seat Carriage (11) with two M10 x 52mm Button Bolts (82) and two M10 Nylon Locknuts (63).
5 | Bookrack | |
| ||
| 4 | |
3 | 97 | |
57 | Ground Wires | |
2 | ||
| ||
| Make sure the wires | |
| do not get damaged | |
| during this step. | |
6 |
| |
9 |
| |
| 7 | |
| 60 | |
60 | 20 | |
| ||
7 |
| |
| 63 | |
| 7 | |
82 |
| |
| 11 |
7
