NordicTrack NTC07940 user manual Assembly

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included tools and your own adjustable wrench .

Use the drawings below to identify the small parts used during assembly. The number in parenthesis below each drawing is the key number of the part, from the PART LIST on page 25. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it has been pre-assembled.

M8 Split	M6 Washer		M10 Split	M8 Nylon	M10 Nylon
Washer (55)–12	(60)–5		Washer (88)–2	Locknut (89)–4	Locknut (63)–2
M4 x 16mm	M6 x 20mm Button		M6 x 45mm Button		M8 x 25mm Button
Screw (57)–4	Screw (20)–6		Screw (80)–1		Screw (79)–4
M8 x 40mm Button		M8 x 40mm Button
Screw (54)–8			Bolt (81)–4	M10 x 52mm Button Bolt (82)–2
			M10 x 118mm Button Screw (78)–2

1.Identify the Front Stabilizer (15). While another person lifts the front of the Frame (1), attach the Front Stabilizer to the Frame with four M8 x 40mm Button Screws (54) and four M8 Split Washers (55).

1
1
15	55
55	54
54

5