Matsushita CF-Y5LWVYZ 1 2 service manual Assembly of the FAN, Axis nor the shuttlecock, Conclusion

9.3.4.8. Assembly of the FAN

< Cushion putting position for cooling FAN >

Affixes Fan Cushion X3

Pressurize the frame within this range or neither shuttlecock in the opening nor the rotation axis.

It is a thing in the opening

which does not begin to be seen.

<Cable fixation seat (FAN/SP) putting position >

FAN externals Flaking off paper ruled line

Affixes Fan/SP Cable Tape

It is a peel putting of the half of the flaking off paper.

Safety work

The FAN cable confirms the thing that beginning to see is not in the concave part.

	Pressurize neither rotation	Screw(DXHM0057ZA)
FAN which has been
	axis nor the shuttlecock.
		Conclusion
prepared is installed.

Do not

transform the frame.

The saliva of FAN is made to slip into the boss of

a top case under.

Work notes

1.FAN must not be dropped, and do not add the impact.

<SCWER tightening torque >

Conclusion first time power : 0.16-0.18N.m {1.6-1.8kgf.cm}

At the repair : 0.10-0.12N.m {1.0-1.2kgf.cm}

After putting, the backup sheet of the disk spring is installed.

Disk Cover Arm Spring installation

The point is inserted

in the hole of a top case.

Affixes

Disk Spring Backup Sheet

< putting position of disk spring backup sheet >

Rib

edge side

Do not go out of this rib heaven side.

55