Matsushita CF-Y5LWVYZ 1 2 Installation of K/B Side Cover, Side Cover R, Side Cover L

9.3.6.15. Installation of K/B Side Cover

KBD Side Rubber

Affisation without in concave
part of KBD Side Cober (L)	Engages with 3 places simulta-
installation
	neous.
KBD Side Rubber(L)
	(Hook breaking measures)
installation	KBD side Rubber affixation
	Affisation without in concave
	part of KBD Side Cober (R)
	running
	KBD Side Cover(L,R)
	Inside Hook is previously
	set, and then outside
	Hook engages

Wire Fixation Tape 1 affixation position

Do not make a mistake as

L side. 3 hole having

Hook

KBD Side Cover (R)

1-3

0-1

Whether Antenna Cable is processed the side under of Boadr is confirmed

KBD Side Cover (R) installation

Explain as an example of KBD Side Cover engagement R side

inside en-	KBD Side Cover
gagement
Hook

	Inside Hook hits	NG
	Top Case and
OK
	breaks

Outside

Hole of engagement Hook

Top Case

9.3.6.16. How to detach Keyboard and K/B Side Cover

K/B SIDE COVER (R)

K/B fixation axis

Confirm there is no transformation when you recycle the K/B.

Both sides tape for fixation

K/B fixation axis

The one in thin, long state of Spatula such as caulking palettes

K/B SIDE COVER (L)

COVER

Lo	ck Hook	Minus Small Driver which wraps
	FIG1	protection cloth etc. around point
		How to detach K/B Side Cover (L)

Both sides tape for fixation

K/B fixation axis

How to detach K/B Both sides tape for fixation

How to detach K/B Side Cover (R)

KBD side cover (R) is detached

after the tightening the 8 Screw

from the bottom are detached,

the tools is inserted between

KBD and Top Case, and the

tape is peeled off while avoiding

the axis for fixation.

Peels off from a central tape.

Tool is not transformed.

Lock Hook 3 place of the cover is removed. (Thin Sheet etc. are inserted between the cover and Top Case and the lock is removed)

Lock Hook 3 place of the cover is removed. (Thin Sheet etc. are inserted between the cover and Top Case and the lock is removed)

77