Matsushita CF-Y5LWVYZ 1 2 Removing the DC-IN Cable, Removing the Antenna Board Unit L, R, Usb Fpc

9.2.12.Removing the Bluetooth-USB PCB Unit (with BT) / Bluetooth Antenna PCB Unit

Preparation : perform the section 9.2.1., 9.2.3. and 9.2.4. first.

1.Remove the screw (V).

Screw (V) : DXQT2+D25FNL (N6)

2.Remove the USB FPC from the tape and CN910,

and then remove the bluetooth-USB PCB unit.

Bluetooth Antenna PCB Unit

Screw (V) Bluetooth-USB PCB Unit

Tape

USB FPC

9.2.13 . Removing the DC-IN Cable

Preparation : perform the section 9.2.1., 9.2.3. and 9.2.4. first.

1.Remove the 1 screw (W) .

Screw (W) : DXQT2+E6FNL (N10)

2.DC-IN jack plate, DC MDM cover, DC-IN cable connector (CN601), and FAN sheet are peeled off, and then remove the DC-IN cable.

Screw (W)

DC Jack Plate

9.2.14.Removing the Antenna Board Unit (L), (R)

Preparation : perform the section 9.2.1., 9.2.3., 9.2.4., 9.2.10. and 9.2.11. first.

1.Peei off the line hold sheet and drive EMI sheet and then remove the antenna board (R).

Line hold sheet : DFHR3D80ZA (K52)

Drive EMI sheet : DFHE1003ZA (K38)

FFC Drive

Drive EMI Sheet

Antenna Cable (R)

Line Hold Sheet

Note:

These sheet cannot be recycled. Please use new parts.

2.Line hold sheet 1 and heat spreader bottom are peeled off from main Board's wireless LAN side, and takes the antenna cable (L) out from the ditch and then remove the antenna board (L).

Line hold sheet 1 : DFHR3D21ZB (K43)

Heat spreader bottom : DFMY3222ZA (K69)

Line Hold Sheet 1

Heat Spreader Bottom

Antenna Cable

(L)

DC MDM Cover	FAN Sheet
DC-IN Cable

Note:

FAN sheet cannot be recycled. Please use new parts.

Antenna Board

(L)

Line Hold Sheet 1

Antenna Cable

(R)Antenna Board

(R)

Note:

Line hold sheet 1 and heat spreader bottom cannot be recycled. Please use new parts.

31