9.2.15. Removing the Wireless LAN Module

9.2.17. Removing the Card Bus Ejector

Preparation : perform the section 9.2.1., 9.2.3.,

Preparation : perform the section 9.2.1., 9.2.3.,

9.2.4. and 9.2.11. first.

9.2.4. and 9.2.11. first.

1. Remove the 2 screws (X).

1. Remove the 1 screw (Z) from connection side of

Screw (X) : DXQT2+D25FNL (N6)

wireless LAN.

2. Wireless LAN module is floated in the connector

Screw (Z) : DXQT2+D25FNL (N6)

fulcrum and removed.

 

Screw (X)

Wireless LAN Module

 

Wireless LAN Module

 

 

Screw (Z)

2

1

9.2.16. Removing the MODEM

Preparation : perform the section 9.2.1., 9.2.3.,

9.2.4.and 9.2.11. first.

1.Remove the 2 screws (Y). Screw (Y) : DXQT2+D25FNL (N6)

2.MODEM will be removed from connector (CN17) to the vertical direction.

Screw (Y)

MODEM

MODEM Cable

Connector

2.Return it on the revers to the card bus ejector side.

3.The minus small driver is inserted in connector (CN13) and the card bus ejector intuition combina- tion parts, 2 places of hooks (E). And then remove the card bus ejector.

Card Bus Ejector

Hook (E)

Main Board

Note :

Be careful not to transform the card bus ejector when you remove the hook.

32

Page 32
Image 32
Matsushita CF-Y5LWVYZ 1 2 service manual Removing the Modem, Preparation perform the .2.1 9.2.11. first