Matsushita CF-Y5LWVYZ 1 2 Putting LCD Side Rubber / LCD Side Damper, Lcd, Rib Rib standard

9.3.2.3. Putting LCD Side Rubber / LCD Side Damper

(LCD handling attention)

-Do not take out the vicinity of the center of the lamp side having when you take out LCD of the packing box. (Because there is a possibility that the transformation of the lamp reflector etc. occur)

-Take out right and left both ends of the lamp side having when you take out LCD.

Affixes it between	10 1mm
the length walls.
(There must not
be overflow)	LCD Protect Plate
	Attention,There
	is directionality

LCD Tape C

Rib standard

01mm Rib

Affixes in a plane plinth (in the frame)

Wide Side

Narrow Side

Affixes it between the length walls. (There must not be overflow)

LCD Side Cushion

Rib standard

01mm Rib

Affixes it between the length walls. (There must not be overflow)

	LCD Side Dunper	Affixes it between	The flaking off paper is peeled
		the length walls.
Steps part
		(There must not	off by the post-processing
		be overflow)

Steps part

Steps part corner standard 0 1mm

Cable Gasket Clot

Affixationh

	Rib standard
	0 1mm
Rib	LCD
	Side Rubber 3
Rib		Rib standard
LCD		0 1mm
Side Rubber 3	Affixes it between
	the length walls.
	(There must not
	be overflow)

Affixes it between the length walls. (There must not be overflow)

LCD Side Dumper

Steps part corner	from externals 0-1mm	Conductive Cloth
standard 0 1mm	There must not be
		externals standard from externals 0-1mm
	overflow from externals	0 1mm	There must not be
			overflow from externals

36