Matsushita CF-Y5LWVYZ 1 2 service manual Putting MCH Sheet / Heat Spreader Bottom

9.3.3.2. Putting MCH Sheet / Heat Spreader Bottom

Running aground do not be on DAI

The flaking off paper in which "5011" is displayed is peeled off and then affixes to MCH.

MCH externals
standard 0	1mm
Safety work
Processes along the
DIMM connector

	Coil externals standard.
MCH externals	Thing in which affixation
	does not exist in coil.

standard 0 1mm

Coil externals standard Line Hold Sheet

Safety work

Line Hold Sheet 1

Affixes in a Sheet externals standard, and fixes Antenna Cable.

				Affixation as touch the Coil
	Heat Spreader Bottom			Space 0-1mm
					Antenna Cable
	CPU Cushion
							Safety work
							Affixes to the capacitor
Affixes in							Antenna Cable fixes by Line Hold
		the silk frame
							Sheet 1 by processing on the Heat
Affixation as fit the							Spreader Bottom Sheet.
								Touch the DIMM Connector
CPU Cushion
Space 0-0.5mm								Affixation space 0-1mm
CPU Thrmal Sheet									wn out here
						Antenna Cable is dra
CPU Thrmal Sheet is			CPU Cushion externals
a thing to the			standard 0 1mm
capacitor without
running aground

Bottom side Heat Sheet preparation specification

Sheet side of Heat Spreader Bottom

Grease1 (G-751)

Spreads by using the treatment device.

Coil externals standard 0-1mm

CPU Thrmal Tape

1-2mm

It is confirmed that CPU Thrmal Sheet does not run aground to the capacitor

42