9.3.4.2. Putting Disk Angle Cushion

Disk Angle

Disk Angle Cushion

Affixes according to the ruled line.

Disk Angle Cushion Affixes according to the

ruled line.

Disk Angle Cushion Affixes according to the ruled line.

Affixes at the right of the ruled line.

9.4.3.3. Assembly of the Top Case

LCD LENS PAD installation (The pin after installs is welded)

The pin is inserted through the top case hole.

Thing not diagonal insert- ed.(crack measures)

Tape posi- tioning pin

W-LAN ON /OFF

SW Knob Sheet

Power SW knob Sheet

Top Case

LED Cushion Affixation

The length hole (2 places) is matched to the positioning pin, and so as not to over on the top case hole (4 places), affixes.

PAD Lenz Tape affixation

Hole for

LENZ (4 places)

LED LENZ BATT installation (The pin after installs is welded)

<Position where LED Cushion is Affixed>

<Position where LED LENS PAD is installed>

Thing without

floatage

Pin shape standard after welds

The pin 2 places (outside) of a top case are welded with a treatment device.

2 places on the inside are the re- serves for the second fixation.

Safety work

Lan Sw Blank Installation

48

Page 48
Image 48
Matsushita CF-Y5LWVYZ 1 2 service manual Putting Disk Angle Cushion, Assembly of the Top Case, LAN on /OFF, Floatage