NordicTrack NTEL7506.1 user manual To damage the Upper Wire Harness

5. Orient the Left and Right Upright Covers (19, 20)	5
as shown. Then, attach the Upright Covers
around the Upright (10) with five M4 x 16mm
Round Head Screws (78).				78
	78		20
			10
	78	19
6. Apply a generous amount of the included grease	6
to the Upper Body Axle (71). Insert the Upper
			65
Body Axle into the Upright (10). Be careful not				96	85
to damage the Upper Wire Harness (65).			Grease
Apply a small amount of grease to a Wave			71
Washer (80). Slide the Wave Washer onto the left		10
end of the Upper Body Axle (71).
	Grease		80	72
Identify the Left Upper Body Leg (24), which is
marked with a sticker, and orient it as shown.	96
Slide the Left Upper Body Leg onto the left side
	85	80
of the Upper Body Axle (71).
Attach the Left Upper Body Leg (24) to the Upper
Body Axle (71) with an M8 x 19mm Button	24
Screw (85) and an M8 x 23mm x 2mm Washer
(96).
Repeat this step for the Right Upper Body
Leg (72).
	7