9.Apply a small amount of grease to the axle on the Left Link Arm (30), to the axle on the Left Pedal Arm (32), and to a Wave Washer (100). Slide the Wave Washer (100) onto the axle on the Left Pedal Arm (32). Next, slide a Link Arm Spacer (74) onto the axle on the Left Link Arm (30).

Then, insert the axle on the Left Link Arm (30) into the left Upper Body Leg (24) while sliding the Left Link Arm onto the axle on the Left Pedal Arm (32).

Repeat this step with the Right Link Arm (31).

10.Attach the Left Link Arm (30) to the Left Pedal Arm (32) with an M8 x 15mm Button Screw (106), an M8.5 x 16mm x 1.5mm Washer (103), and an Axle Cover (66).

Attach the Left Link Arm (30) to the left Upper Body Leg (24) with an M8 x 25mm Button Screw (110), two M8.5 x 16mm x 1.5mm Washers (103), two Axle Covers (66), a Link Arm Spacer (74), and an M8 x 15mm Button Screw (106) as shown.

Attach the Right Link Arm (31) in the same way.

11.The Console (11) can be operated with four 1.5V “D” batteries (not included); alkaline batter- ies are recommended. Locate the two battery covers on the back of the Console. Press the tabs on the battery covers, and remove the bat- tery covers. Next, insert two batteries into each battery compartment; make sure that the bat- teries are oriented as shown by the symbols inside the battery compartments. Then, reat- tach the battery covers.

The Console (11) can also be operated with a regulated 6-volt DC 2-amp power supply (not included). To purchase a power supply, call the toll-free telephone number on the front cover of this manual. To avoid damaging the console, use only a manufacturer-supplied power supply. Plug one end of the power sup- ply into the jack on the elliptical exerciser; plug the other end into an outlet installed in accor- dance with all local codes and ordinances.

9

24

 

 

 

31

 

 

 

 

 

 

 

 

 

Grease

74

 

 

 

 

 

30

 

100

32

 

 

 

 

 

 

 

 

Grease

 

10

24

 

 

 

31

 

 

 

106

10366 74

 

 

 

66103

 

110

 

 

 

 

 

 

 

30

 

 

 

 

 

106

103

66

32

11

 

 

 

 

 

Battery

 

 

11

 

 

Cover

 

 

 

 

 

 

Battery

 

 

 

 

 

Cover

 

 

 

 

 

12.Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser.

9

Page 8 Page 10
Page 9
Image 9
NordicTrack NTEL7706.1 user manual Repeat this step with the Right Link Arm, Attach the Right Link Arm 31 in the same way
Page 8 Page 10

NTEL7706.1 specifications

The NordicTrack NTEL7706.1 is a state-of-the-art treadmill designed to enhance your home fitness experience through cutting-edge technology and user-friendly features. This model stands out with its emphasis on interactive training, bringing gym-quality workouts right to your living room.

One of the key features of the NTEL7706.1 is its impressive 10-inch touchscreen display. This feature transforms the traditional treadmill experience by offering a vibrant interface where users can select from a variety of workouts and track their progress in real time. The included iFit technology elevates the training experience, providing access to countless on-demand workouts guided by professional trainers. With iFit, users can even enjoy virtual running trails from around the world, making every session feel unique and motivational.

The NTEL7706.1 is equipped with a powerful 3.0 CHP motor, designed to deliver consistent performance, even during intense workout sessions. The treadmill boasts a maximum speed of 12 mph, allowing users to push their limits as they work on speed and endurance. Its incline capabilities, reaching up to 15%, further mimic outdoor running conditions, providing an effective way to add intensity to your workouts.

In addition to these functionalities, the treadmill features a spacious 20" x 60" running surface, offering ample room for comfortable strides. The FlexSelect cushioning system provides the option to customize the deck’s firmness, allowing users to choose between a softer surface that reduces impact on joints or a firmer feel that closely resembles running outdoors.

Moreover, the NTEL7706.1 integrates Bluetooth technology, enabling users to easily connect their devices for music streaming. This feature enhances the workout experience, as users can enjoy their favorite tunes or podcasts while exercising. The built-in speakers amplify sound quality, creating an engaging environment.

Durability and stability are critical aspects of the NTEL7706.1, featuring a robust frame designed to withstand the rigors of intense workouts. Its foldable design allows for easy storage, making it a practical choice for home gym setups of any size.

In summary, the NordicTrack NTEL7706.1 combines advanced technology with user-centric design, making it an excellent choice for anyone looking to enhance their fitness journey. With its interactive features, powerful motor, and customizable settings, this treadmill caters to a wide range of fitness levels and goals.
Top Page Image Contents