RuggedCom RS900GP manual Type Test Specifications, IEC 61850-3 Type Tests

3. Specifications

3.7. Type Test Specifications

3.7.1. IEC 61850-3 Type Tests

Test	Description		Test Levels	Severity
				Levels
IEC 61000-4-2	ESD	Enclosure Contact	+/- 8kV	4
		Enclosure Air	+/- 15kV	4
IEC 61000-4-3	Radiated RFI	Enclosure ports	20 V/m	x
		Signal ports	+/- 2kV @ 2.5kHz	x
IEC 61000-4-4	Burst (Fast Transient)	D.C. Power ports	+/- 2kV	4
		Earth ground ports	+/- 2kV	4
		Signal ports	+/- 2kV line-to-earth,	4
			+/- 1.5kV line-to-line
IEC 61000-4-5	Surge
		D.C. Power ports	+/- 1.5kV line-to-earth,	3
			+/- 1kV line-to-line
		Signal ports	10V	3
IEC 61000-4-6	Induced (Conducted) RFI	D.C Power ports	10V	3
		Earth ground ports	10V	3
IEC 61000-4-8	Magnetic Field	Enclosure ports	40 A/m continuous,	N/A
			1000 A/m for 1 s
IEC 61000-4-29	Voltage Dips & Interrupts	D.C. Power ports	30% for 0.1s, 60% for	N/A
			0.1s, 100% for 0.05s
		Signal ports	2.5kV common, 1kV	3
			differential mode @ 1MHz
IEC 61000-4-12	Damped Oscillatory
		D.C. Power ports	2.5kV common, 1kV	3
			differential mode @ 1MHz
IEC 61000-4-16	Mains Frequency Voltage	Signal ports	30V Continuous, 300V for 1s	4
		D.C. Power ports	30V Continuous, 300V for 1s	4
IEC 61000-4-17	Ripple on D.C. Power Supply	D.C. Power ports	10%	3
		Signal ports	1.5kV AC (Fail-	N/A
IEC 60255-5	Dielectric Strength		Safe Relay output)
		D.C. Power ports	1.5kV DC	N/A
IEC 60255-5	H.V. Impulse	Signal ports	5kV (Fail-Safe Relay output)	N/A
		D.C. Power ports	5kV	N/A

Table 3.9. RS900GP IEC 61850-3 Type Tests

RuggedCom® RuggedSwitch™ 21 RS900GP Installation Guide Rev 100