NordicTrack NTEX3196.0 user manual Battery Covers Batteries Batteries

5.The Console (9) requires four 1.5V “D” batteries (not included); alkaline batteries are recommended.

IMPORTANT: If the exercise cycle has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries into the Console. If you do not do this, the con- sole displays or other electronic components may become damaged. Press the tabs on the bat- tery covers and remove the battery covers. Next, insert four batteries into the Console; make sure that the batteries are oriented as shown by the diagrams inside the Console. Then, reattach the battery covers.

Note: The Console (9) can be operated with an optional power supply instead of batteries. To pur- chase a power supply, call the toll-free tele- phone number on the front cover of this manual. Plug one end of the power supply into the jack at the front of the exercise cycle. Plug the other end of the power supply into an appropriate outlet that is properly installed in accordance with all local codes and ordinances.

6.Attach the Handlebar (7) to the Handlebar Post (6) with four M6 x 30mm Button Screws (46). Be care- ful to avoid pinching the wires in the Handlebar and the Handlebar Post.

5

Battery

Covers

Batteries

Batteries

9

6

46

7

6

7