10.Attach an M6 x 10mm Screw (60) to the Seat
Post (11). Next, slide the Seat Carriage (19) onto the Seat Post. Then, adjust the Seat Carriage to the desired position and tighten the Seat Knob (31) into the Seat Carriage.
See the inset drawing. Attach another M6 x 10mm Screw (60) to the Seat Post (11).
11.Identify the Left Pedal (40), which is marked with a sticker. Using an adjustable wrench, firmly tighten the Left Pedal counterclockwise into the Left Crank Arm (15). Tighten the Right Pedal (not shown) clockwise into the Right Crank Arm. Important:
Tighten both Pedals as firmly as possible. After using the exercise cycle for one week, retighten the Pedals. For best performance, keep the Pedals tightened.
Press the tab on the side of the Left Pedal (40) and adjust a Pedal Strap (25) to the desired position.
Adjust the other Pedal Strap (not shown) in the same way.
10 | 60 |
| 11 |
| 31 |
| 19 |
| 60 |
| 11 |
11 |
|
25 | 15 |
Tab | 40 |
|
12.Make sure that all parts are properly tightened before you use the exercise cycle. Note: Some hard- ware may be left over after assembly is completed. Place a mat under the exercise cycle to protect the floor or carpet.
9
