NordicTrack NTEX3196.0 user manual Assembly, adjustable wrench

ASSEMBLY

Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

In addition to the included hex keys, assembly requires a phillips screwdriver and an

adjustable wrench .

As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 22. The number following the parentheses is the quantity used in assembly. Note: Some small parts may have been preassembled for shipping. If a part is not in the parts bag, check to see if it has been preassembled.

M10 Split	M4 x 12mm	M4 x 16mm	M4 x 19mm
Washer (55)–3	Screw (64)–1	Screw (54)–6	Screw (47)–2
M6 x 10mm	M6 x 30mm Button		M10 x 50mm Button
Screw (60)–2	Screw (46)–4		Screw (48)–3
	M10 x 85mm Button
	Screw (56)–4

1.Attach the Front Stabilizer (2) to the Frame (1) with two M10 x 85mm Button Screws (56).

1

1

2

56

5