10. Attach an M6 x 10mm Screw (60) to the Seat | 10 | 60 | |
Post (11). Next, slide the Seat Carriage (19) onto the | |||
| |||
Seat Post. Then, adjust the Seat Carriage to the |
|
| |
desired position and tighten the Seat Knob (31) into |
|
| |
the Seat Carriage. |
|
| |
|
| 11 | |
See the inset drawing. Attach another M6 x 10mm |
| 31 | |
|
| ||
Screw (60) to the Seat Post (11). |
| 19 |
60
|
| 11 | |
11. Identify the Left Pedal (40), which is marked with a | 11 |
| |
sticker. Using an adjustable wrench, firmly tighten |
| ||
|
| ||
the Left Pedal counterclockwise into the Left Crank |
|
| |
Arm (15). Tighten the Right Pedal (not shown) |
|
| |
clockwise into the Right Crank Arm. Important: |
|
| |
Tighten both Pedals as firmly as possible. After |
|
| |
using the exercise cycle for one week, retighten |
|
| |
the Pedals. For best performance, keep the |
|
| |
Pedals tightened. |
|
| |
Press the tab on the side of the Left Pedal (40) and | 25 | 15 | |
| |||
Tab | 40 | ||
adjust a Pedal Strap (25) to the desired position. | |||
| |||
Adjust the other Pedal Strap (not shown) in the |
|
| |
same way. |
|
|
12.Make sure that all parts are properly tightened before you use the exercise cycle. Note: Some hard- ware may be left over after assembly is completed. Place a mat under the exercise cycle to protect the floor or carpet.
9
